Water Transmission API 5L X65 Submerged Arc Welding Pipe

The developing trend of LSAW steel pipe in the future:
in terms of the onshore gas,with the large diameter LSAW steel pipe, its single-tube gas transmission capacity could reach the level of 50 billion cubic meters / year, pipe diameter can reach ф1422mm, and gas transmission pressure can reach 12MPa;
in terms of the ocean steel pipe, the gas pipeline develops towards the direction of deep-sea pipeline (> 1500 meters), marine structural tube towards the direction of high-intensity, large wall thickness, for example ф610mm×31.8mm, X65 grade;
in terms of business management, plate and pipe integration (steelmaking - Continuous Casting - rolled plate - pipe manufacturing) is the future development trend, for example in Japan and India plate and strip production line is always equipped with a welded steel pipe unit;
entering the market of high-grade structural tubes, this is an important question to be considered by the LSAW steel pipe production line manufacturer when deploying the device, so it is necessary to set the preheating device before pre-welding, or set the heat treatment process and so on;
in marketing, in addition to oil and gas pipelines, there is slurry pipelines;
anti HIC tube and anti deformed tube are with a considerable market prospect, can be used to transport acid gases and improve the ability against external environmental damage in harsh geological conditions (landslides, mudslides, earthquakes).

LSAW pipe (longitudinal Submerged Arc Welding Pipe) is fromed by JCOE with one straight welded seam, the outer diameters usually from 610mm to 1420mm. When the outer diameter is 914.4mm above, it’s allowed two straight welded seams. LSAW pipe is used to convey low pressure liquid meida or high pressure petroleum or natural gas, and can be also used widely in structural supports or foundation. The advantage for LSAW type is they could produce more thick wall thickness of pipes, maximum to 50mm.

Size:
Outer Diameter: 610mm-1420mm
Wall Thickness: 6.35mm-50mm
Length: 6mtr-18mtr
End:square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled,
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings
Packing:Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.

Hebei Huayang Steel Pipe Company Ltd. is the largest ERW and LSAW steel pipe manufacturer in Northern China. Established in 2005, we have a modern factory covering an area of 666,000 square meters, with over 700 employees and a fixed asset of 200 million USD, annual output capacity is up to 1,000,000 Tons. We can quickly fulfill all of our domestic and international customers’ orders, try our best to meet customers’ requirements.

We are located in Cangzhou city, Hebei province, a large steel production base in Northern China. Huayang is near to the raw material steel mill, such as Hebei Zhongtie Equipment Company, Shandong Iron and Steel Co., Ltd, Shougang Group, Jinxi Group, which reduce the material cost. At the same time, Huayang is 210 kilometers from Beijing, 150 kilometers from Tianjin City, 160 kilometers from Xingang port, with convenient transportation, which is convenient for customer’s visit and reduce the transportation cost. With lower material cost control, we can offer more competitive price and significant profit for our customers.

Huayang use advanced imported production equipment such as German once-through rolling machines, British CT METORI digital controllers, one φ114.3mm-φ168.3mm ERW steel production line, three φ219mm-φ426mm ERW steel pipe production line, one φ426mm-φ660mm ERW steel pipe production line, one JCOE production lines for LSAW pipe, size range from 16” to 56” (406.4mm-1422.4mm), wall thickness: 9.53mm-50mm. In 2018, we build a new advanced RBE production line for LSAW pipe, size range from 16” to 56” (406.4mm-1422.4mm), wall thickness: 9.53mm-30mm.

Twenty φ245mm-φ820mm thermal expansion pipe production lines, we have our own high-tech physics and chemistry labs where we can conduct our own tests such as physical properties and chemical composition test, and as well, UT, hydraulic test, X-ray and other test equipment is available, which can meet all related standards and inspection requirements.

In order to provide One-Stop service for customers with superior products from qualified supplier, Huayang set up branch company, Cangzhou Wingo International Trading Co., Ltd in 2013, to help customers purchase different products, such as seamless steel pipes, SSAW steel pipes, Galvanized pipes, Anti-corrosion pipes, pipe fittings and flanges etc.

Huayang steel pipes are used as the construction material and the pipelines for oil, gas, water, steam, and other middle & low hydraulic pressure fluids. Huayang’s products are sold nationwide and mainly exported to Southeast Asia, Middle East, South America, Africa, North America and Europe. Our company has consistently aimed to provide our customers with high quality, affordable industrial pipes. “Huayang” brand steel pipe has gained praises and high reputation from all of the world.